A traffic control crew can arrive at 6:30am with the right tickets, the right ute and the right attitude, and still not be able to start. The usual reason isn’t the crew. It’s that the paperwork that lets anyone stand on that road — the plan, the diagram and the permission — isn’t in place, or nobody on site can find it.
This guide is for the builder or site manager booking traffic control for construction work. It covers what has to exist before the crew turns up, who is allowed to design and approve it in QLD, NSW, VIC & WA, and how to work out how many controllers you actually need. The tickets the workers carry are a separate topic, covered in our state-by-state traffic control ticket guide and our guide to ticket expiry and renewal.
The three things that must exist before day one
Transport for NSW’s standard Traffic Control at Work Sites (TS 05492, June 2026) gives clear definitions that work in every state:
- Traffic management plan (TMP) — a document setting out the work, the risks it creates and the control measures, including the effect on public transport, cyclists, pedestrians, motorists and businesses, with the approvals required from the road authority.
- Traffic guidance scheme (TGS) — the diagram showing the signs and devices that guide traffic around, past or through the work site. It used to be called a traffic control plan.
- Permission to occupy the road — the permit or licence from whoever manages that road.
Then there is the safety paperwork. Construction work carried out on or near traffic is high risk construction work, so a safe work method statement (SWMS) must be prepared before the work starts. Victoria’s OHS Regulations 2017 say the same for work on or next to roads used by traffic.
Who is allowed to design the plan
The plan is not something a site manager sketches on the back of a pre-start. The national framework splits the roles: a Traffic Management Designer (TMD) designs the TMP and its traffic guidance schemes, and a Traffic Management Implementer (TMI) puts it on the road, with any change beyond tolerances endorsed by a TMD. State rules sit on top of that:
- New South Wales: a site-specific TGS is produced by a person qualified to prepare a work zone traffic management plan (PWZ), and verified on site. A pre-designed generic TGS can be selected for a site by a PWZ or IMP-qualified person, with a site verification.
- Queensland: a traffic control permit application on a state-controlled road must include a TMP approved by an appropriately qualified individual.
- Western Australia: Main Roads requires TMPs for works with complex traffic management arrangements to be reviewed and endorsed by an accredited Roadworks Traffic Manager (RTM).
Who gives permission to use the road
This is the step that most often causes a late start, because the answer depends on whose road it is.
Queensland. On a state-controlled road, the Department of Transport and Main Roads (TMR) wants two things in order. First, permission to occupy the road — for example through a Road Corridor Permit. Then a Traffic Control Permit. TMR says the applicant must be the traffic management company doing the traffic control (or its authorised representative), registered under TMR’s Traffic Management Registration Scheme. The application needs at least 10 business days to process and must include a public liability certificate of currency of not less than $20 million noting TMR, a deed of indemnity, the registration certificate number and the TMP. Registration is compulsory on state-controlled roads. On council roads, ask the council what it needs.
New South Wales. Transport for NSW says a Road Occupancy Licence (ROL) is required for any activity likely to impact traffic flow, even if the activity itself is off-road. ROLs are applied for online through the OPLINC system. Councils run their own approvals for local roads, and can be strict. Inner West Council, for example, allows no traffic control without a TMP submitted to and accepted by the council. It also requires a TfNSW ROL where works are within 50 metres of traffic lights or on a State road.
Victoria. Temporary traffic management companies must be accredited by the Head, Transport for Victoria to work on roads it manages, or to apply for its Memorandum of Authorisation permits. Accreditation is held by companies, not by individual workers. Its conditions require anyone doing traffic management for an accredited company — including people engaged through a registered labour hire provider — to hold valid qualifications.
Western Australia. Main Roads requires you to notify it and obtain consent for roadworks needing traffic management on a state road. The same applies on a local road where the work affects traffic signals or is within 30 metres of them. All traffic management must follow the Traffic Management for Works on Roads Code of Practice. Companies implementing traffic management on State roads that involves a closure or speed restriction must be registered under Main Roads’ company registration scheme. For other local road work, the local road authority is the contact.
How many traffic controllers do you need?
The honest answer: the TGS tells you, not a rule of thumb. Under the NSW standard, a TGS must show the types and locations of traffic control positions and devices. It must also show the safe location and escape route for each traffic controller, and estimated queue lengths. Two-way stop/slow on a single lane, side-street control and pedestrian management at a site gate are different set-ups with different headcounts.
Book against the scheme for the whole shift, and remember people need breaks. If the TGS isn’t finished, the crew size is a guess — and so is the quote.
Utes, arrow boards and signs
“Traffic control vehicles” is the other half of most bookings. The devices on the road — signs, cones, barriers, arrow boards, vehicle-mounted equipment — should be exactly what the TGS shows, no more and no less. Confirm before the day who is supplying what: the traffic management company, the builder, or the labour hire provider.
The morning check
- Is the permit or ROL on site, and does today’s date and time window match it?
- Is the approved TGS on site, and does the set-up match it?
- Does the SWMS cover work near traffic?
- Does every controller hold a ticket valid in this state? Queensland only accepts TMR accreditation, and Western Australia publishes an online accreditation search.
- Has everyone done the site induction, and does each controller know the escape route?
Where DL Aus Group fits
We supply traffic controllers to builders across QLD, NSW, VIC & WA, and have done since 2019. We check every card against the state the job is in before the shift, and we can arrange utes, arrow boards and signage for the job when you need them. In QLD, VIC & WA we supply the traffic controllers only: they work under your registered or accredited traffic management company’s plan and permit. NSW is the one state where we can supply the traffic control crew without a separate traffic management company — the TGS and any road occupancy licence still need to be in place before the shift. We’re fully insured and hold labour hire licences in QLD (LHL-04372-G3F0N) and VIC (VICLHL03363).
Send us the TGS and the permit window, and we’ll crew it.
No minimum contract — book one worker for a single shift or a full crew for the length of the job. Need someone on site today? Call +61 415 540 088; same-day starts are available when you ring through your request. QLD Labour Hire Licence LHL-04372-G3F0N.
Official sources
- Transport for NSW — TS 05492 Traffic Control at Work Sites (June 2026)
- Transport for NSW — Road occupancy licences
- Inner West Council — Work zone permit terms and conditions
- Queensland Department of Transport and Main Roads — Traffic control permit
- Queensland Department of Transport and Main Roads — Traffic Management Registration Scheme
- Queensland Department of Transport and Main Roads — Traffic controller accreditation scheme
- Transport Victoria — Temporary traffic management accreditation program
- Main Roads Western Australia — Working on roads
- Safe Work Australia — Interactive SWMS tool (high risk construction work)
- WorkSafe Victoria — Safe Work Method Statements (SWMS)
This article explains publicly available road authority and regulator requirements as at October 2026. Requirements vary by road and by state and change over time — confirm with the road manager for your job before you rely on it.